HYUNDAI UNVEILS REAR-WHEEL DRIVE CONCEPT GENESIS COUPE

  • Second rear-wheel drive performance car from Hyundai
  • 300+ horsepower from enhanced 3.8-liter V6 from Genesis sedan
  • Production version of the sports coupe arrives in spring of 2009

Hyundai unveiled its highly anticipated Concept Genesis Coupe during a press conference at the Los Angeles International Auto Show today. The concept car heralds the introduction of an all-new, rear-wheel drive 2 + 2 sports coupe scheduled to join the Hyundai lineup in the spring of 2009. Following the introduction earlier this year of the Concept Genesis sedan, Concept Genesis Coupe signals Hyundai's second step in broadening its appeal to driving enthusiasts.

The Sonic Orange concept is complemented by a Ballistic Black carbon fiber hood, roof and ground effects that reduce body weight. Strong hints of the production version are highlighted in its "Z" bodylines and powerful curves. When the production sports coupe arrives, it likely will be the most affordable 300+ horsepower car on the market and the most dynamic performance car yet from Hyundai.

"Concept Genesis Coupe is the most thrilling and emotional Hyundai yet," said John Krafcik, vice president, product development and strategic planning, Hyundai Motor America.

DESIGN PROCESS

"The mission for Concept Genesis Coupe was to create a pure performance car with a design that would capture the imagination of hardcore automotive enthusiasts," said Joel Piaskowski, chief designer at the Hyundai Design Center in Irvine, Calif. "With its aggressive look from just about any angle, I think we have been able to do that."

Designers used the Day Light Opening (DLO - a designer's term for the side glass) from the HCD9 Talus Concept on the Concept Genesis Coupe.

The HCD-8 sport tourer concept's sensual body forms influenced the overall design direction of Concept Genesis Coupe.

The powerful curves, surface detail and "Z" body side lines come straight from the same underlying inspiration that guided two earlier, well-received concepts:  the HCD9 Talus and the HCD8 sports tourer.

The undulating beltline borrowed from the Talus adds intrigue while enhancing outward visibility for both the driver and rear passengers.

The HCD8 sports tourer's sensual body influenced the overall design theme while also providing direction for the concept's assertive headlight and taillight designs.

The look of Concept Genesis Coupe was in part inspired by LeMan's race cars, drifters and by Jada Toys Dub City™ die cast vehicles. The front and rear stance of the Concept Genesis Coupe can be described as sinister.

"Beauty and danger co-exist in the design of the Concept Genesis Coupe," said Eric Stoddard, senior creative designer. "When viewed from a distance, the car is beautiful to look at. But up close it can appear a bit menacing and even a little intimidating."

The concept's rocker panels are drawn close to the ground making the bodysides extra thick and the daylight opening extremely thin, allowing the wheels to be slammed up into bulging fenders.

Three large heat extractors sculpted into the hood are designed to cool just about any powerful engine. When the concept becomes reality, three large openings in the front fascia will allow for better engine breathing.

The dual exhaust tips integrated into the rear fascia repeat the design theme of the front cooling ducts and are surrounded by a large carbon fiber air diffuser.

An arching roofline and tapering greenhouse highlight the exterior profile and emphasize the car's broad shoulders and wide stance. ConceptGenesis Coupe rides on 20-inch polished aluminum deep-dish wheels with Hankook 255/35 ZR front tires and 275/35 ZR rear tires.

CONCEPT GENESIS COUPE SPECIFICATIONS

  • Configuration: Front engine, rear-wheel drive sports coupe
  • Wheelbase: 2,820 mm / 111 inches
  • Overall length: 4,666 mm / 183.7 inches
  • Overall width: 1,902 mm / 74.9 inches
  • Overall height: 1,386 mm / 54.5 inches
  • Wheels: 20-inch, five-spoke
  • Tires: Hankook 255/35 ZR front and 275/35 ZR rear

PRELIMINARY PRODUCTION CAR DETAILS

  • Engine type: V6
  • Estimated horsepower: more than 300 horsepower
  • Estimated torque: more than 250 lb. ft.
  • Displacement: 3.8 liters
  • Block material: high pressure die cast aluminum
  • Cylinder head material: aluminum
  • Valvetrain: Dual Over Head Cam (DOHC)
  • Valve timing: continuous variable valve timing
  • Estimated 0-60 mph: under 6 seconds
  • Transmission type: 6-speed manual
  • Front brakes: Brembo, 340 mm disc, twin-piston calipers
  • Rear brakes: Brembo, 330 mm disc, twin-piston calipers
  • Limited slip differential

Comments are closed

RELATED ARTICLES:
SECOND ROCKAR HYUNDAI STORE OPENS AT WESTFIELD LONDON STRATFORD
Hyundai-westfield-london-780x519
Hyundai Santa Fe Harman Audio
Hyundai-Santa-Fe
Hyundai ix35 hydrogen filling station just on M1 near Sheffield
hydrogen-filling-station
Hyundai N technology drives Korean national bobsleigh team
hyundai-korean-national-bobsleigh
NEW HYUNDAI SANTA FE FRANKFURT MOTOR SHOWW
Hyundai-Santa-Fe
HYUNDAI OPENS ITS FIRST NFL DRIVE WITH THE “2015 NFL KICKOFF PRESENTED BY HYUNDAI”
Hyundai-NFL-1
Hyundai Vision Gran Turismo Teaser
Hyundai_Gran_Turismo
Hyundai College Football – #Thisisloyalty Campaign
Hyundai-college-football
Hyundai’s N high-performance sub-brand in spotlight at Frankfurt Motor Show
hyundai-rm15-concept
2016 HYUNDAI ACCENT HITS DEALERSHIPS THIS AUGUST
hyundai-accent-engine

3D Car Shows on Google+

3D Car Shows on Youtube

3D Car Shows YouTube